DRYER REPAIR IN KENMORE, WASHINGTON
Dryer Repair in Kenmore, WA
Looking for dryer repair in Kenmore, Washington? We fix gas and electric dryers, including Kenmore front load and top load models. Tell us what the dryer is doing. We check the simple things first, then the parts, in a clear order.
✓ Gas and electric dryers✓ Kenmore dryers✓ Plain-English answers
Safety first. Unplug your dryer before you look inside it.
What is your dryer doing?
Pick the problem for the usual causes.
Not heating→Won’t start→Noisy or drum won’t turn→Not sure? Call us now
Gas and electric
We work on both types of dryer
Kenmore dryers
Models, problems and error code help
Kenmore, WA
7915 NE 205th St, Kenmore, WA 98028
Dryer repair in Kenmore, WA
Your local dryer repair service in Kenmore, Washington
We are an independent dryer repair service in Kenmore, Washington. We repair gas and electric clothes dryers, including Kenmore brand front load and top load models. Call us, tell us what the dryer is doing, and we find the fault.
Looking for a Kenmore dryer repair service near you? Our technician repairs clothes dryers in Kenmore, WA, from a simple fix to a full repair. You may call it appliance repair, dryer service or a repairman visit. The first step is the same. Tell us what the dryer is doing. If your dryer is not drying clothes, takes two cycles to finish, or stops mid-load, a dryer technician can usually find the cause in one visit. Call a dryer repairman who unplugs the machine, tests the parts and explains the fault in plain words.
- We start with the simple things. Vent, power, breaker and door fix more dryers than you would think.
- Safety comes first. We tell you to unplug the dryer, and when to stop.
- You hear the cost before work starts. You decide.
- Gas and electric dryers. The checks are different. We know both.
- Kenmore brand know-how. We look up your model number so the part is right.
[Provider to confirm every point above before launch.]
At a glance
| Service | Dryer repair and diagnosis |
|---|---|
| Dryers | Gas and electric clothes dryers. Kenmore front load and top load models |
| Common faults | No heat, will not start, noisy drum, belt, thermal fuse, door switch |
| Place | Kenmore, King County, Washington, USA |
| Address | 7915 NE 205th St, Kenmore, WA 98028 |
| Phone | (425) 555-0100 |
| Brand note | Independent repair service. Not part of Kenmore or Sears |
Kenmore the city, Kenmore the brand. “Kenmore” means two things here: the city where we work, Kenmore, Washington, and the appliance brand many people own. We repair dryers in the city, and we work on Kenmore brand dryers.
Services
Dryer repair services in Kenmore, WA
Pick the problem that matches your dryer. Each page names the usual causes in plain steps.
[Provider to confirm the full list of repairs offered.]
How we find the fault
We test the part before we call it bad
A dryer that will not heat or will not start has a break somewhere in the circuit. We use a multimeter to check the thermal fuse, the heating element, the thermostats and the wiring one by one, so the repair fixes the real problem and not a guess.
- Vent, power and breaker are checked first, because they cause many no-heat calls.
- Each part is tested with the power off and the dryer unplugged.
- You hear what failed and what it costs before any part is fitted.
Our process
Our process: from first call to a working dryer
Four steps. No guessing, no surprises. [Provider to confirm these steps before launch.]
Call or send the form
Tell us the brand, the model if you have it, and what the dryer does.
We check the simple things
Vent, power, breaker and door come first.
We test the parts and quote
We test the part with a meter. You hear the fault and the cost before work starts.
Repair and test run
We fit the part, run the dryer and check the heat and the drum.
Repair or replace
Repair or replace? How to decide
We tell you what we see so you can decide. These are the questions that matter.
Repair usually makes sense when
- The dryer is otherwise in good shape.
- The fault is one part, like a belt, fuse or switch.
- The repair costs much less than a new dryer.
- A warranty, plan or recall covers it. Check how.
Replacement may make sense when
- The dryer is old and other parts are worn.
- The part is a motor or control board and the dryer is not new.
- The dryer overheats again and again.
- The repair would cost close to a new dryer.
Reviews
Customer reviews in Kenmore, WA
We only publish real reviews from real customers. We never post made-up ones. Reviews and testimonials appear here after real repairs, with the customer’s permission.
Be the first to review us
Had your dryer repaired? Tell us how it went. Your review helps your Kenmore neighbours choose a repair service they can trust.
- Real name and city only if you agree.
- Mention the dryer and the fault if you like.
- We publish honest reviews, good or bad.
[Provider to add the Google review link here once the business profile exists.]
Leave a review or testimonial
Send it with the form. We read every message.
Testimonials
[Real testimonials appear here, with the customer’s written permission.]
What to expect
Three common repairs and what to expect
These are typical scenarios, not individual customer jobs.
Runs but no heat
Usual finding
A clogged vent or a blown thermal fuse.
Usual fix
Clear the vent, test, then replace the fuse.
Cost
Depends on the part. We quote first.
Thumping drum
Usual finding
A worn belt or rollers.
Usual fix
Replace the belt, pulley or rollers.
Cost
Depends on the parts. We quote first.
Will not start
Usual finding
A door switch, start switch or tripped breaker.
Usual fix
Test, then replace the part.
Cost
Depends on the part. We quote first.
Where we work
Dryer repair near me: serving Kenmore and nearby
Our address is 7915 NE 205th St, Kenmore, WA 98028, in King County at the north end of Lake Washington.
[Provider to confirm which nearby cities are covered. Only Kenmore is confirmed.]
Call with your street or ZIP code and we will tell you if we cover you.
After a storm
After a storm or power cut: 4 steps for your dryer
Winter storms can leave a dryer dead or tripping the breaker. Do this in order.
Unplug the dryer
Wait a minute, then plug it back in.
Check the breaker
Switch both halves of the double breaker off, then on.
Check the lint trap and vent
Damp air and lint block the flow.
Still dead or tripping?
Stop and call us. A repeat trip means a fault.
Before you call
Four checks before you call
Want to fix your Kenmore dryer yourself first? Safety first. Unplug the dryer. Then try these in order.
Clean the lint trap
Look at the vent hose behind the dryer. A crushed or clogged vent is a common reason for no heat.
Check the breaker
Electric dryers use a double breaker. One half can trip while the other stays on.
Check the door
A dryer will not run if the door does not close and latch.
Check the gas valve
On a gas dryer, make sure it is open. If you smell gas, leave and call the gas company.
About us
About us
We are an independent dryer repair service at 7915 NE 205th St, Kenmore, WA 98028.
[Provider to add the owner or technician name, experience, licence and insurance. Only facts that are true and can be proved.]
Questions
Dryer repair questions, answered
How much does dryer repair cost in Kenmore, WA?
It depends on the fault and the part. A blocked vent is not the same job as a failed motor or control board. Call us, tell us what the dryer does, and we will explain the repair and the cost before work starts. See the pricing page for what changes the price.
Do you repair Kenmore brand dryers?
Yes. We repair Kenmore dryers, including front load, top load, gas and electric models. We are an independent repair service and are not part of Kenmore or Sears.
Is there Kenmore dryer repair near me in Kenmore, WA?
Yes. We are a Kenmore dryer repair service in the city of Kenmore, WA, at 7915 NE 205th St. Check the service area page or call with your street or ZIP code to confirm we cover you.
Why is my dryer not heating?
The usual causes are a blocked vent, a tripped breaker, a blown thermal fuse or a failed heating part. Check the vent and the breaker first. Read the not-heating guide.
Why won’t my dryer start?
Check the power, the breaker and the door first. A failed door switch, start switch or thermal fuse can stop a dryer from starting. See the won’t-start steps.
Why is my dryer so noisy?
A thump often means a worn belt or rollers. A squeal often means the idler pulley or motor bearing. Do not run a dryer that grinds. Read the noise and belt guide.
Do you repair gas dryers and electric dryers?
Yes. The checks are different. An electric dryer uses a double breaker and a heating element. A gas dryer uses an igniter and gas valve coils. Gas work is for a technician.
Is it safe to keep using a dryer that gets too hot?
No. Stop, unplug it and call us. Lint and a blocked vent trap heat. Read the warning signs and fire safety guide.
Should I repair or replace my dryer?
It depends on the age of the dryer, the part and the cost of the repair. We tell you what we see and leave the decision with you.
Is a Kenmore dryer repair ever free?
Only when a warranty, service plan or recall covers it. Check your paperwork first. See how to check.
How do I find my Kenmore dryer model number?
Open the door and look on the door frame. It can also be on the back or side of the cabinet. See where to look.
How do I book a dryer repair in Kenmore?
Call us or send the quote form. Tell us the brand, the model and what the dryer does.
Book
Ready to book? Here is how it works
Call or send the form
Tell us what the dryer is doing.
Get your quote
We explain the fault and the cost.
Book the repair
You choose. We fit the part and test the dryer.